FIKA power:7.4v 1300mAh Li-Poly Lipo Battery Pack w/ PCB and Bare Leads LIPO
Item Code:LIPOFeatures:7.4V 1300mAh Polymer Li-Ion Polymer battery pack Nominal Voltage: 7.4V Capacity: 1300mAh Max. Discharging rate: 7Amp with PCB
Detail:
Features and Benefits
-
One protective circuit board PCB installed with the battery pack that limits the discharging current of battery pack to 3Amp. But protect battery from:
- Over-charging cut-off: 8.4V
- Over-discharging cut-off: 4.6V
- Over-drain >6.5Amp
- Short circuit and Wrong polarity
-
Light-weighted : 1.6 oz.
-
Dimension: 66mm x 39mm x 12mm
-
4" (12mm) long prewired and shrink wrapped, 26AWG Wires
-
Recommended charger: Universal Li-ion / Li-polymer Smart Charger to charge this battery pack.
-
If you connect two of these modules in parallel, you can build a 7.4V 1.75 Ah Battery pack with a 1.7 Amp discharge rate.
-
Applications:
- HID Bikelight or Dive light
- Autonomous submarine
- RC Car and RC airplane with greater energy needs
- Building external battery packs for Laptop computers or 12V portable devices
Caution:
Improper use like overcharging and over discharging can cause explosion and/or fire. User of the battery is required to have sufficient Li-polymer charging experience and technical knowledge. VB Power or vbpowerbattery.com are not responsible for any damage or injury caused by misuse, misunderstanding or abuse of this product.
